cNw Commando Bearings

Bad bearings can damage your transmission and wheels, cripple your bike, and make it difficult to handle. So when you’re rebuilding your Norton Commando or replacing its worn bearings, turn to cNw for durable, long-lasting bearings in open, sealed or shielded options. We currently offer bearings for all areas of your bike, including its transmission, wheels and clutch.

Superblend Crank Bearing, Transmission / Inner Mainshaft, Transmission / Outer Mainshaft, Transmission / Inner Layshaft, Steering Neck / Tapered Roller, Steering Neck / Sealed, Wheel / Single Row, Wheel / Double row, Rear Wheel MkIII / Sealed, Clutch Hub

Superblend Crank Bearing


Manufacturer:  FAG

Description:  Roller bearing

Details:

  • Roller brass cage
  • Superblend is the std for the late model Commando engine and the best crank bearing set-up
  • A pair can be used even on earlier model engine that used a ball on the timing side
  • Proven performance for all types of engines from stock to performance tuned

CNW part # AND064118

Price $ 119.95 each

Add #AND064118 to Cart

Transmission / Inner Mainshaft


Manufacturer:  General

Description:  Sealed ball bearing

Details:

  • This being a sealed bearing will make it less likely to allow any transmission fluid to seep through it and leak out of the case
  • High quality  and proven performance

CNW part # 0502-02

Price $ 37.95 each

Add #0502-02 to Cart

Transmission / Outer Mainshaft


Manufacturer:  SKF

Description:  Open ball bearing

Details:

  • Direct replacement for the outer mainshaft bearing
  • High quality SKF brand

CNW part # 0502-04

Price $ 35.95 each

Add #0502-04 to Cart

Transmission / Inner Layshaft


Manufacturer:  SKF

Description:  Open roller bearing

Details:

  • This replaces the weak, stock, inner layshaft bearing that are prone to failure
  • High performance and a must when rebuilding a Commando transmission

CNW part # 0502-03

Price $ 50.95 each

Add #0502-03 to Cart

Steering Neck / Tapered Roller


Manufacturer:  Timken

Description:  Tapered roller bearing (open)

Details:

  • High performance roller capable of greater loads than the stock, sealed, ball bearing
  • This is a 2 part bearing with a race that gets seated in the steering neck and a cage that fits over the steering stem
  • This set up does require that the bearing spacer used on the stock bearings is removed
  • Since this is an open bearing it will require periodic maintenance

CNW part # 0402-01

Price $ 30.95 each (2 required)

Add #0402-01 to Cart

Steering Neck / Sealed


Manufacturer:  SKF

Description:  Sealed ball bearing

Details:

  • This bearing is a direct replacement for the stock, sealed bearing
  • The stock bearing spacer has to be used for this bearing to work properly
  • This is a great quality bearing and since its sealed it wont require any service

CNW part # 0402-02

Price $  27.95 each (2 required)

Add #0402-02 to Cart

Wheel / Single Row


Manufacturer:  SKF

Description:  Sealed ball bearing

Details:

  • This is a direct replacement for the open wheel bearing used in both the front and rear hubs
  • Use these bearings for maintenance free operation

CNW part # 0102-01

Price $ 14.95 each

Add #0102-01 to Cart

Wheel / Double row


Manufacturer:  SKF

Description:  Sealed double row ball bearing

Details:

  • This sealed double row bearing will replace the stock open version
  • Due to the fact that this bearing is wider than the stock version, machining of the center spacer is required when fitting it
  • For maintenance free operation use this bearing in combination with the single row bearing above

CNW part # 0102-02

Price $ 69.95 each

Add #0102-02 to Cart

Rear Wheel MkIII / Sealed


Manufacturer:  SKF

Description:  Sealed ball bearing

Details:

  • Direct replacement for the inner, left side, MkIII rear hub bearing
  • High quality SKF brand

CNW part # 0102-03

Price $ 18.95 each

Add #0102-03 to Cart

Clutch Hub


Manufacturer:  SKF

Description:  Open ball bearing

Details:

  • Direct replacement for the clutch basket
  • Only for use with a chain/wet primary

CNW part # 0602-01

Price $  43.95 each

Add #0602-01 to Cart