cNw Frame & Body

The motorcycle frame and body are what hold your Norton Commando motorcycle together. Then isn’t it important to keep them in the best shape possible to give your bike the smoothest ride and the coolest look? Colorado Norton Works, a motorcycle builder offers the latest, highest quality pieces for your motorcycle body, designed by both our in-house customizers and other motorcycle part manufacturers, including custom motorcycle fenders, motorcycle billet specialties and instruments spacers.

cNw billet triple trees with internal brake line option, Steel Roadster Fuel Tank, cNw Rear Sets for Drum Brake Commandos, cNw Billet Triple Trees, Handlebar style & Clip on style, CNW Billet Center Console, CNW triple tree installation kit, cNw Stainless Steel Top Fork Nuts, cNw Stainless Steel SHORT Fork Top Nuts, cNw Billet Headlight Ears, CNW Billet Z Plates, MKIII Isolastics Conversion, Dual Electronic Instruments Kit, Solo Electronic Speedometer. Both MkIII and Pre MkIII available, Solo Electronic Tachometer Kit, Head Steady, cNw Steel Front Fender, cNw Fender Brace, cNw Chain Guard, Corbin Seat, cNw Z-Plate mounting hardware, License Plate Bracket, Cable Clamps

cNw billet triple trees with internal brake line option


Manufacturer:  cNw & Damtech

Description:  This is the billet triple trees we have used for a few years on our builds that are now made available for purchase. These are unique in that the lower clamp has an internal brake line web machined into it. What this will do is allow you to run a short line from the master cylinder directly to a banjo on top of the lower clamp. Then another short line from the clamp down to the caliper. So the upper line will tuck in and never move since it’s stationary. Very clean and trick as it replaces the very long brake line normally running from the master cylinder to the caliper. The kit also includes a brake switch for a dependable operation of your brake light

Details:

  • Same high quality as our std triple trees. See here for details
  • Outstanding fit and finish
  • Lower clamp has internal brake line web machined into it
  • Kit includes the two banjos and one banjo bolt for the lower line
  • Kit includes a hydraulic brake switch that doubles as a banjo bolt for the upper line
  • The hydraulic brake switch wires go directly into the headlight

IMG_9000      AU2Y0569

cNw part #  0400-66  Handlebar style

Price $  839.00

cNw part # 0400-67  Clip on style

Price $  839.00

 

Add #0400-66 to Cart

Add #0400-67 to Cart

Steel Roadster Fuel Tank


Manufacturer:  Emgo (Taiwan)

Description:  Dont let the Taiwan manufacture scare you. This is the replacement fuel tank we have been waiting for. Due to the fact that the older Commando fiberglass tanks are not compatible with modern blended fuels, there has been a need for quality replacement steel tank. Until now, that has not been available. Looking this tank over, it’s a very close copy of the original. The fuel cap mount, knee indentations, overall shape and dimensions, it’s a very nice reproduction. We have seen original stock tanks off of Commandos that were not as nice as this particular tank

Details:

  • Roadster model, all steel, direct replacement fuel tank
  • Front and rear mounting holes and petcock holes are sized as stock
  • The lower panel is pressed out of one piece of metal, just like the original tank
  • The upper section is made from 2 halves with a welded seam down the middle
  • There is an internal baffle like the late-model stock tanks had
  • A stock Commando flip cap will fit the tank

Important note:  This tank is paint grade and will need some prep and minor body work before final finish is applied.

The strap in the front, shown in the image below, is only there for shipping. The tank mounts just like the stock tank

IMG_0103      IMG_0108      IMG_0100

CNW part #  0403-04

Price $  475.00

 

Add #0403-04 to Cart

cNw Rear Sets for Drum Brake Commandos


Manufacturer: cNw & Damtech

Description: cNw decided to develop and offer a rear set kit that is made with the same quality and finish that you have come to expect.  We know that there a few on the market but wanted to do something a bit different.  The design uses a reversed shift lever that then also reverses the shift pattern on your machine.  When setting up this type of shifter we also found that the foot position needs to be changed so that the shifter can be located in the best possible location for ease of shifting.  In order to make this possible we also made a special z plate for this kit. We have had several on the road for an extended period of time and the feed back has been great

cNw Satisfaction Guarantee:  Rear sets are sometimes hard to fit. We make them to work for as many body types as possible. We have to consider the length of a person’s leg, the size of the foot, handlebar style and also the type of seat used. Having said that, the rear sets will work better for some than for others. I realize that the cNw kit is not inexpensive and if you install a set and after some miles decide that it just doesn’t work, I will offer a full refund, for a limited time after the purchase, assuming that the kit shows minimal wear when returned

Details:

  • The entire kit is made out of 6061 aluminum and stainless steel
  • The kit is truly complete with all that you need in order to install it
  • Kit uses unique z plates and can not be installed on the std, original plates
  • The set up changes the shift pattern to 1 down and 3 up
  • The brake cable operation is designed so that the cable enters a housing and engages a cam. Extremely clean and it works as well as it looks
  • There is a micro brake light switch inside the left side z-plate
  • Kit includes a brake cable and also some special, Stainless steel inner mounting plates for the exhaust
  • Stainless hardware to install is included
  • The kit can be used with a std kick-start lever but for better clearance and room for your foot, we recommend the folding kick-start lever shown in the last image below

Notes: 

  • The rear sets do not allow you to run passenger pegs
  • The z-plates do not have any provision for a Zener Diode to be installed

 

                                   

cNw part # 0400-44   Complete kit includes z plates

Price $ 998.95

cNw part # 0517-01    Folding kick-start lever NOTE: This kick-start lever is currently unavailable from our vendor.

Price $ 198.00

 

Add #0400-44 to Cart

cNw Billet Triple Trees, Handlebar style & Clip on style


Manufacturer: cNw & Damtech

Description:  Replace your existing trees or use these for the ultimate look on your Commando custom bike. The trees have been CNC machined out of 6061 billet aluminum and have been finished to the highest possible standard. We designed them to enhance your Commando front end with soft, radius corners and enough material thickness to ensure that they stay extremely rigid. We also developed a clip on style set for those that want to get the aggressive look that only they can offer.

Details:

  • CNC milled out of 6061 billet aluminum
  • Aligns the fork tube with the steering stem for greater high-speed stability compared to the stock design. This alignment also betters the torsional rigidity in the steering neck
  • Computer designed to maximize strength and minimize weight
  • The handlebar clamps are secured from the bottom of the top yoke for an extremely clean appearance
  • The lower stem nut is located in a recessed pocket so that it can not be seen from the front or sides
  • There are holes drilled through the top yoke and handlebar clamps to allow for internal handlebar wiring
  • Stainless Steel fork stops
  • The lower yoke pinch area is superior in design that will center the fork tube in the bore. The stock version will not do this but rather push the tube to the side of the bore
  • If a post mounted style headlight is being used there is a recess on the bottom yoke that just needs to be drilled through (The hole size is 3/8-inch)
  • The trees are available in both a 7/8-inch handlebar style and a clip on style
  • The trees are available in a brushed finish and a show polished finish
  • Either the standard sealed ball bearings with the distance piece or optional tapered roller bearings can be used to mount the trees
  • These triple trees weigh 30% less than the standard triple trees

Notes:

  • The stock headlight ears can not be used with this set up. See our headlight ears as a perfect match in both material and finish
  • These triple trees will not allow you to install the stock MkIII plastic console. The only option if you want to retain a dash board would be to install a cNw console
  • If you have a 1970 or earlier frame, the lower yoke needs to be slightly modified before installation. Contact Us to get details about this mod. We can do the necessary modifications in the shop to the trees but if you have the  early steering  stops (1 on each side of the steering neck)  then those will have to be removed and a center steering  stop, like later model frames had,  will need to be welded on.

 

NOTE:  This type of triple trees is currently unavailable. Click here for the new updated version of  triple trees

cNw part # 0400-06    Handlebar style / Brushed finish

Price $ 698.00

cNw part # 0400-07     Handlebar style / Polished finish

Price $ 698.00

cNw part # 0400-08    Clip On style / Brushed finish

Price $ 698.00

cNw part # 0400-09    Clip On style / Polished finish

Price $ 698.00

 

Contact Us to Order

CNW Billet Center Console


Manufacturer:  CNW & Damtech

Description:  Designed to work with our Billet triple trees, this console will work with both the CNW electronics package or the original instrument holders

Details:

  • Cut out of a single, 7 lb chunk of 6061 Billet aluminum
  • Weighs only 7 oz
  • Includes a marine grade Voltmeter
  • Includes a barrel style ignition switch. This is a 3 position unit. Off / On / On + Lights
  • Includes 3 warning lights.  Blue, Amber, Red and Green available
  • The console is completely built and wired, ready to install

Notes: 

  • When using the original instrument holders they have to by slightly modified to work with the console
  • This console will not work with the std Commando triple trees. Console is designed  to be used with these trees  See Here
  • The console will only work with a Negative ground wiring harness

                                 IMG_9730     

CNW part # 0400-14    Complete console for Original instrument holders

Price $ 599.95

CNW part # 0400-15    Complete console for CNW Electronics package

Price $ 599.95

 

Contact Us to Order

CNW triple tree installation kit


Manufacturer: CNW

Description: Complete kit with everything you need when installing your triple trees

Details:

  • Type 2
  • Polished Stainless Steel upper dust cover
  • Polished Stainless Steel lower stem nut
  • 2 upper washers for correct clearance to dustcover and bearing
  • Lower stem washer

 

CNW part # 0800-10

Price $ 49.95

 

Add #0800-10 to Cart

cNw Stainless Steel Top Fork Nuts


Manufacturer: cNw & Damtech

Description: Replace those rough looking stock chrome fork nuts with these precision CNC machined Stainless Steel top nuts.

Details:

  • 303 Stainless Steel
  • CNC machine cut
  • Single point cut threads
  • Dished top surface for greater reflection
  • Show polished
  • Includes Stainless Steel washers

Note: We also make a short top nut if you are not using instruments. See details below

 

IMG_1893

cNw part # 0400-34

Price $ 75.00 pair

 

Add #0400-34 to Cart

cNw Stainless Steel SHORT Fork Top Nuts


Manufacturer: cNw & Damtech

Description: These fork nuts are identical to the ones above except for that they are made shorter so those that prefer to run without instruments will have a Top Nut that is flush mounted rather than having to use a spacer with the original length Fork Nut

Details:

  • Short length Top Nut designed to secure the fork tube without the need of a spacer.
  • Same features as the # 0400-34 Fork Nuts above

 

IMG_1899

cNw part # 0400-35

Price $ 75.00 pair

 

Add #0400-35 to Cart

cNw Billet Headlight Ears


Manufacturer: cNw & Damtech

Description: Very nice replacement set of headlight ears

Details:

  • CNC milled from 6061 aluminum
  • Light weight
  • Beautiful finish and fit
  • Stainless hardware
  • Vintage style
  • Available in a Show Polish or a Brushed finish

cNw part # 0400-36    Polished finish

Price $ 169.00 pair

cNw part # 0400-37    Brushed finish

Price $ 169.00 pair

 

Add #0400-36 to Cart

Add #0400-37 to Cart

CNW Billet Z Plates


Manufacturer:  CNW & Damtech

Description:  Direct replacement foot rest mounts. Light, strong and great custom look

Details:

  • 6061 aluminum
  • Extremely strong yet light weight
  • Show polished finish
  • Great see through effect when using a frame color other than black

Note:  Stainless hardware kit to install these plates  See Here

     

CNW part # 0400-42    Polished finish

Price $ 319.00 pair

CNW part # 0400-43    Brushed finish

Price $ 319.00

 

Add #0400-42 to Cart

Add #0400-43 to Cart

MKIII Isolastics Conversion


Manufacturer: CNW

Description: This kit will replace the Isolastics in any year bike with the adjustable style that was used in the MKIII Commando. The Vernier style adjusters make adjustments very easy compared to very difficult and time consuming on earlier models. With the MKIII style adjusters you can get both front and rear done in a matter of minutes. The internal rubbers are also of a better design than what was used previously. In typical CNW fashion we weren’t pleased with the look and finish of the standard MKIII adjusters, abutments and cups so we are using stainless steel pieces to replace all these. They are of course show polished and we don’t use a rubber boot to cover them up as this not only traps moisture and dirt but also hides these very ‘trick’ looking parts. The kit we offer is complete and ready to install. It’s very easily done on your engine parts if they are not on your bike, and will require a fair amount of work to put in place if your bike is assembled. The kit includes a machined and powder coated front engine mount yet you will receive a credit when / if you return your old mount. If you don’t want your front mount powder coated Gloss Black, contact us and we can discuss your options.

Details:

  • Both front and rear new internal rubbers
  • Front and rear new PTFE friction washers
  • Complete stainless Isolastics kit with Adjusters, Abutments and Cups
  • All stainless parts are show polished
  • Machined, powder coated (Gloss Black) and prepped front engine mount
  • The front mount is assembled and ready to install. The rear will require installation in your engine cradle. This is a simple procedure as long as the rear iso tube is easily accessed.
  • 30.00 credit when / if you return your old front engine mount that is not damaged.

 

                 

CNW part # 0400-38

Price $ 559.00    ( 30.00 credit when/if you return your front ISO mount core )

 

Add #0400-38 to Cart

Dual Electronic Instruments Kit


Manufacturer: CNW & Damtech

Description:  Change your instrumentation to a state of the art analog, electronic set-up that will not only take care of all the issues that plague the original mechanical gauges and drives, but will also take you to the highest level of quality, finish and performance. The CNW dual gauge kit uses Autometer gauges, the leader in electronic motorcycle gauges, to ensure that the information you are getting is accurate and consistent. The gauges are water resistant to handle the harsh environment they are operating in. The CNW billet aluminum gauge bracket is CNC machined to the highest level of quality and finish. We designed it to be located at the same upper plane that the original gauges are located at. The gauges are rubber suspended in the bracket itself. This allows for a very clean mount and also isolates the gauge from some of the vibration. CNW also designed two different speed sensor pick-ups to work with both the rear drum brake Commandos as well as the MKIII disc model. These CNC machined stainless pieces are made to make for a simple yet extremely clean installation. The quality of this electronic instruments package is what you have come to expect from CNW

Note: The kit is designed to run with a Negative ground system only

Details:

  • CNC machined billet aluminum gauge mount for strength, weight savings and beautiful finish.
  • The gauge mount uses a unique mounting system that allows for a very clean mount that also isolates the gauge from vibration.
  • The Gauge mount is designed to be used with the standard top fork nut and washer for a very straight forward installation.
  • The gauges 3 3/8 wide and are very close overall dimensionally to the original instruments.
  • Simple hook up for both the Speedo and Tach.
  • MK III kit includes a speed sensor mount, made in stainless steel, that replaces an existing spacer at the rear wheel and the speed sensor is getting its pulses from the disc mounting hardware
  • The rear drum brake kit includes a replacement bearing retainer, special spacer and speed sensor mount, all made in stainless steel, for an extremely clean installation and to replace what was there to originally drive the speedo. – Built in instrument light
  • Available with a Black or White dial
  • Gauge holders are available in a Brushed or Polished finish
  • The kit includes a polished billet Tach blanking plate, CNW # 111
  • The kit will replace: Speedo, tach, instrument lights, instrument buckets, speedo cable, tach cable, tach drive, speedo drive all of which are questionable at best as far as performance, reliability, longevity and build quality. Not to mention the leaks associated with these parts at the tach drive and speedo drive units

Note: The center console shown in the images below is not part of the kit but available separately.

                                                     

These kits below are designed for  1968-1974 years

CNW part # 0400-51    Black Dial / Brushed Holder

Price $ 995.00

CNW part # 0400-52    Black Dial / Polished Holder

Price $ 995.00

CNW part # 0400-53    White Dial / Brushed Holder

Price $ 995.00

CNW part # 0400-54    White Dial / Polished Holder

Price $ 995.00

These kits below are designed for the 1975,  MkIII

CNW part # 0400-55    Black Dial / Brushed Holder

Price $ 995.00

CNW part # 0400-56    Black Dial / Polished Holder

Price $ 995.00

CNW part # 0400-57    White Dial / Brushed Holder

Price $ 995.00

CNW part # 0400-58    White Dial / Polished Holder

Price $ 995.00

 

Add #0400-51 to Cart

Add #0400-52 to Cart

Add #0400-53 to Cart

Add #0400-54 to Cart

Add #0400-55 to Cart

Add #0400-56 to Cart

Add #0400-57 to Cart

Add #0400-58 to Cart

Solo Electronic Speedometer. Both MkIII and Pre MkIII available


Manufacturer: CNW & Damtech

Description:  If accurate speed and an odometer is important to you, yet you want to stay with the performance look of a solo center mounted instrument then this is it. CNW’s solo handlebar mount is not only available in a Tach set-up (#130) but also with the Autometer speedo. The unique one piece billet gauge holder will allow you to angle the speedo any way you want it to get the best view of the instrument. The gauge holder is also designed in such a ways that it holds the gauge securely yet carefully with an internal rubber mount. It can fit any 7/8’s handlebars. The Autometer gauge is designed for motorcycle applications and built to operate in the environment of a motorcycle application. The analog speedometer also has a digital odometer and trip meter. The instrument is always lit when ignition is on. The kit comes with CNW’s extremely clean speed sensor mounts that will replace the original speedo drive and related parts. The speed sensor parts are all CNC machined in stainless steel and then show polished for an unmatched quality look. The hook up requires the rear wheel to be removed but is very straight forward. 

Note: The kit is designed to run with a Negative ground system only.

Details:

  • Unique 1 piece gauge holder for a clean a strong mount
  • Billet aluminum for strength and weight savings
  • Gauge holder allows you to rotate the gauge to desired position for perfect viewing
  • 3 3/8 Autometer electronic gauge with built in instrument light
  • All speed sensor parts are CNC machine in high grade stainless steel then show polished
  • The kit is available for a rear drum or a MKIII disc application
  • The instrument is available in a White or Black dial
  • Gauge holder is available in a Brushed or Polished finish

           

These are the Pre MkIII (1969-1974) kits:

CNW part # 0400-22    White Dial / Brushed Clamp

Price $ 745.00

CNW part # 0400-23    White Dial / Polished Clamp

Price $ 745.00

CNW part # 0400-24    Black Dial / Brushed Clamp

Price $ 745.00

CNW part # 0400-25    Black Dial / Polished Clamp

Price $ 745.00

           

These are the 1975  MkIII kits:

CNW part # 0400-26    White Dial / Brushed Clamp

Price $ 745.00

CNW part # 0400-27    White Dial / Polished Clamp

Price $ 745.00

CNW part # 0400-28    Black Dial / Brushed Clamp

Price $ 745.00

CNW part # 0400-29    Black Dial / Polished Clamp

Price $ 745.00

 

Add #0400-22 to Cart

Add #0400-23 to Cart

Add #0400-24 to Cart

Add #0400-25 to Cart

Add #0400-26 to Cart

Add #0400-27 to Cart

Add #0400-28 to Cart

Add #0400-29 to Cart

Solo Electronic Tachometer Kit


Manufacturer: CNW & Damtech

Description: We wanted to offer an all performance, all business look than only a single center mounted gauge can give you. CNW’s solo handlebar mount takes advantage of all the benefits of using an electronic instrument while giving you a heads up display of what the engine below you is winding up to. The gauge is made by Autometer, the leader in electronic instrumentation for motorcycles. The gauge is extremely reliable, accurate and designed to operate in the harsh environment of a motorcycle application. The CNW billet aluminum gauge holder is designed to hold the gauge securely yet carefully with a unique internal rubber mount. The gauge bracket is very easily mounted on any 7/8 handlebars and will rotate to any desired position. The simple 3 wire hook up allows for a very clean and straight forward installation. When the ignition is turned on the instrument automatically lights up

Note: The kit is designed to run with a Negative ground system only

Details:

  • Unique 1 piece gauge holder for a clean and strong mount
  • Billet aluminum for strength and weight savings
  • Gauge holder allows you to rotate the gauge to desired position for perfect viewing
  • 3 3/8 Autometer electronic gauge
  • Simple three wire hook up
  • Built in instrument light
  • Available with a Black or White dial
  • Gauge holder available in a Brushed or Polished finish
  • Kit includes a Polished Billet Tach blanking plate

 

     

CNW part # 0400-18    Black Dial / Brushed Clamp

Price $ 495.00

CNW part # 0400-19    Black Dial / Polished Clamp

Price $ 495.00

CNW part # 0400-20    White Dial / Brushed Clamp

Price $ 495.00

CNW part # 0400-21    White Dial / Polished Clamp

 

Add #0400-18 to Cart

Add #0400-19 to Cart

Add #0400-20 to Cart

Add #0400-21 to Cart

Head Steady


Manufacturer: Comstock Engineering

Description: Replace your original head steady with this superior unit that is designed for highest possible performance but is also made to last. The unit is easily mounted on the bike simply by removing the tank and removing the old head steady parts. It fits without any modifications to the bike and it uses the existing mounting holes, including the mount on the frame tube. It’s a slim and simple design yet built to be extremely strong. The rod ends are maintenance free and once the unit is installed and adjusted you don’t have to worry about it again. The head steady has been used and proven on track bikes for several years without any wear or performance issues

Details:

  • Proven linkage type design for solid handling without an increase in vibration.
  • Head plate and frame mount is CNC machined 6061 billet aluminum for strength and weight savings.
  • Easy installation using the original mounting points.
  • Preset linkage may be adjusted if needed
  • Frame mount is designed to be self adjusting due to differences in dimension from one frame to another
  • Unaffected by heat, cold or moisture
  • Preloaded and sealed rod ends will not get loose or noisy
  • Drilled to use a MKIII spring kit if desired
  • Stainless steel head hardware included
  • Standard finish is bead blasted. Also available polished

           

CNW part # 0400-41    Satin Finish

Price $ 372.00

CNW part # 0400-40    Polished Finish

Price $ 422.00

 

Add #0400-41 to Cart

Add #0400-40 to Cart

cNw Steel Front Fender


Manufacturer: cNw

Description:  cNw exclusive replacement front fender. Great fit and size for the Commando front end

Details:

  • A specially fabricated for cNw solid steel U-bracket helps support fork legs.
  • Clean look
  • Strength of steel as opposed to a glass fender that have a tendency to crack
  • Fender is delivered in a paint grade, raw steel that can be painted, chromed or powder coated
  • Uses no fender stays
  • Perfect for use with cNw/Brembo front brake system

Note: This fender will not fit with a 4.10 tire size. The sidewall on that tire is to tall and the fender does not have enough adjustment to clear. Perfect fit with a 100/90-19″ size tire

IMG_8377      IMG_9566      IMG_9124

cNw part # 0400-01    Paint grade, raw steel

Price $ 129.95

 

Add #0400-01 to Cart

cNw Fender Brace


Manufacturer: cNw

Description: Custom fender brace

Details:

  • This lower fender brace is deisgned to allow the ues of the cNw/Brembo #602 brake system with an original fender
  • Solid 3/8 bar
  • Available in bare steel, powder coated Silver or powder coated Black

           

cNw part # 0400-03    Bare steel

Price $ 79.00

cNw part # 0400-04    Black powder coat

Price $ 95.00

cNw part # 0400-05    Silver powder coat

Price $ 95.00

 

Add #0400-03 to Cart

Add #0400-04 to Cart

Add #0400-05 to Cart

cNw Chain Guard


Manufacturer: cNw & Deutsch

Description: Custom made steel chain guard. These guards used to be hand formed and with that came some variations and imperfections. I decided to invest in the tooling necessary to have these guards formed out of a single piece of metal. I am working with a quality machine shop (Deutsch & Sons) and the result is a really nice quality chain guard.

Details:

  • This is a new and improved version of the  popular cNw chain guard that is designed to flow with the rear fender and wheel
  • The core steel is laser cut for very tight tolerances and consistent fit and finish
  • Nice slim design for a light weight and all-purpose look.
  • 18 gauge mild steel
  • Bare steel that can be Chromed, Painted or Powder coated (not included in the price)

Note:  These can be finished in Chrome or Gloss Black Powder Coating. Contact us for info and price

                 

cNw part # 0400-47  bare metal

Price $ 136.95

 

Add #0400-47 to Cart

Corbin Seat


Manufacturer:  Corbin

Description:  Replacement seat for Roadster models

Details:

  • Great look for the Roadster bodywork
  • Comfortable, ergonomic design
  • Quality seat with a fiberglass set pan, high density seat foam and high quality leather and vinyl for the cover
  • Simple mounting system with a single peg that unlocks with a key
  • Steel seat mounting bar mounts between the upper shock bolts (see image below)
  • Stock seat knobs can be retained even though they are no longer used
  • If the single seat mounting post is removed, a stock seat can be installed
  • We can special order any combination of colors and material
  • We stock a seat in all Black. Smooth leather seat area. Smooth vinyl sides and tail. Blacked out Corbin logo
  • The Carbon leather seat area, that I used to stock, is no longer available from Corbin

Important notes:

  • Same price as buying directly from Corbin but we keep them in stock so you don’t have to wait to have the seat made
  • Due to the side cover design on the 1970 models, in some cases we have found that there isn’t enough clearance between those covers and the seat to allow it to fit securely on the back bone of the frame
  • The front part of the Corbin seat is designed to rest against the fuel tank. This can cause some wear on the paint work in that area

 IMG_6168

cNw part #  0406-01

Price $  453.00

 

Add #0406-01 to Cart

cNw Z-Plate mounting hardware


Manufacturer: cNw

Description: Get rid of those crude looking bolts once and for all. Includes stainless hardware for the main exhaust plats and the foot rest assemblies.

Details:

  • Type 1
  • Stainless steel
  • All show polished
  • Button head allens
  • Acorn nut for the rear Iso stud

IMG_5654

cNw part # 0800-16    pre 1975 models (1969-1974)

Price $ 64.95

cNw part # 0800-17    1975 MkIII model

Price $ 64.95

 

Add #0800-16 to Cart

Add #0800-17 to Cart

License Plate Bracket


Manufacturer: CNW

Description: strong,  small and well designed license plate bracket for the early tail light assembly

Details:

  • For use with old style taillight
  • Laser cut
  • Turn signal mounts
  • 14 gauge steel
  • Heavy duty and very well made

Note:  Does not include mounting hardware. See hardware section for this.

IMG_6613

CNW part # 0400-49    Bare steel

Price $ 72.95

CNW part # 0400-50    Black powder coated finish

Price $ 89.95

 

Add #0400-49 to Cart

Add #0400-50 to Cart

Cable Clamps


Manufacturer:  Motion Pro

Description:  Cable clamps

Details:

  • A great way to keep your Speedo and Clutch cable tucked away
  • The dual clip swivels and also allows the cables to move freely so that there is no risk of binding as the front and is moved from side to side
  • Comes with a rubber base so that the frame finish is protected

IMG_8808      IMG_8810

CNW part #  0401-08

Price $  37.95

 

Add #0401-08 to Cart